Filling fermentors with unboiled wort
This past weekend I was able to try a brewing technique that I’ve been wanting to do for a few months now: Brew a no-boil beer, AKA Raw Ale. most brewers have been taught that you have to boil beer, that’s just the way it is and it’s not something to be questioned. Kind of like how beer always has to have hops and barley. None of these is necessarily true, and most of these requirements stem from laws governing commercial production of beer some of them dating back hundreds of years. The truth is, before the advent of large metal pots for boiling in and cheap abundant fuel sources, it was more likely that most beer was not boiled, just heated enough to hasten the conversion of starches to sugars. I’ll admit right off that the historical aspect of this is appealing to me, but more appealing is the amount of time and fuel I can save by brewing this way; practicality FTW.
But wait, you say, isn’t boiling necessary for various practical purposes, like sanitization and hop isomerization? The answer is not exactly. The three main reasons to boil your beer generally taught is to pasteurize your wort to prevent unwanted infection, to boil off DMS which will otherwise make your beer taste like canned corn, and to isomerize and dissolve alpha acids from hops into the wort to lend bitterness to your beer. There are some other things that also happen in the boil but these three are often touted as the main reasons why you have to boil your wort. Let’s talk about them.
- Boiling pasteurizes your wort. Actually pasteurization can happen at much cooler temps than boiling. It will happen in 30 minutes at 150F and in like 3 seconds at 160F. So your standard hour long mash should be effective pasteurization for your wort.
- Boiling drives off DMS. This is true, the thing we’re missing is that DMS doesn’t form until the wort reaches 175-180F so if you don’t go above this you don’t get DMS.
- Boiling isomerizes and dissolves alpha acids from hops. This is true and is the biggest drawback to brewing raw ale. However you can get some isomerization and IBUs by putting hops in your mash. By using high alpha varieties (I like Horizon) and in large quantities you can achieve an IBU level that is fine for a number of styles; styles I happen to enjoy. You’d probably have trouble getting to IBU levels required for a double IPA with this method, but for belgian/farmhouse styles 10-15 IBU is ok. I’ve also thought about adding hops in your strike and sparge water, I’ve read that you need some sugar in solution to get isomerization but have never actually seen any science backing this assertion up.
So having rationalized away most of these requirements, I felt confident to give raw ale a try. Due to it being Father’s Day weekend and me having an awesome wife, I was able to brew on Saturday and Sunday. This did indeed shave a couple hours off of my brew day so I was happy about that (and so was Anne). I brewed a spruce beer on Saturday and a lemon balm and cypress beer on sunday. I used slightly different techniques for each to see sort of what that would do for the beers.
hopped strike water in the mash
For this beer I used the following recipe:
- 14 lbs Northwest pale malt
- 6 lbs Munich 20L
- 4 lbs Flaked wheat
- 4 oz Horizon hops (11.5% AA) in the mash for 70 minutes (60 minutes saccharification + 10 minutes mashout)
- 4 oz Spruce tips in the mash for 70 minutes (60 minutes saccharification + 10 minutes mashout)
- 4 oz Spruce tips in the mash for 40 minutes (30 minutes saccharification + 10 minutes mashout)
- 4 oz Spruce tips in the mash for 20 minutes (10 minutes saccharification + 10 minutes mashout)
I mash in a cooler and I add water that’s well above my strike temp to the room temp cooler, then let the water cool to my strike temp before doughing in. Right before I added the water I though, i should add some hops now, so I dumped in about half of the 4 oz right before I added the 180F water to the mash cooler. It took about 12 minutes to cool to my strike temp of 166F when I added the grain the rest of the hops and the first charge of spruce tips. After 30 minutes I added the second charge and sorta kinda stirred them into the mash and the same again 20 minutes later. After the full 60 minute mash the temp was down to about 150F which is more than I typically lose. I’m going to blame opening the mash up twice and adding cold/frozen spruce tips to it; still an acceptable loss. I vorlaufed about 3 gallons until it was running quite clear and drained the mash. My first running gravity was 19° Brix (1.077) according to my refractometer. I added 7.5 gallons of sparge water at 180F and achieved a mashout temp of 168F that I let sit for 10 minutes and then vorlaufed and drained again. Second running gravity was 8.4° Brix (1.034).
After draining the sparge, I began chilling the wort for pitching yeast, hey, it’s a no boil! Chilling didn’t seem to be much shorter than when I boil which does make sense. Once I got it down to 80F I drained into two carboys and pitched yeast. For this beer I’m trying out a new local yeast I harvested in some final runnings from my last brew day in the spring that I left sitting open to the air while I cleaned and put everything away then I added a plum blossom from my tree and it was fermenting by the next day. The other half got my other test local yeast that has proven itself in a few batches already and I’d like to see the differences between these two. As part of my ongoing investigation into the theory that the dominant yeast around my neighborhood is an expressive fruity bubblegum belgiany yeast. The OG for the beer was 12.4°Brix (1.050) according to my refractometer and 1.046 according to my hydrometer so I’m not sure what to believe.
Update: Tasting notes for the spruce beer
Lemon balm and cypress beer
Lemon balm, cypress and hops in the mash cooler
On Sunday I brewed this recipe:
- 11 lbs Northwest pale malt
- 9.25 lbs Pilsner malt
- 3.75 lbs Munich 20L
- 3 oz Glacier hops (5.6% AA) in mash for 80 minutes (+ mashout)
- .75 oz East Kent Golding hops (5.9% AA) in mash for 80 minutes (+ mashout)
- .75 oz Fuggles hops (6.3% AA) in mash for 80 minutes (+ mashout)
- 8 oz Leyland Cypress boughs in mash for 80 minutes (+ mashout)
- 7 oz Lemon Balm plants in mash for 80 minutes (+ mashout)
- 1 oz Glacier hops in first wort/whirlpool?
- .5 oz Saaz hops in first wort/whirlpool?
- 4 oz Leyland Cypress boughs in first wort/whirlpool?
- 7 oz Lemon Balm plants in first wort/whirlpool?
For this beer I just dumped all of the herbal and hop mash additions into the mash cooler before I added the hot water that had to cool down it also took about 12 minutes to cool to strike temp and then I mashed for 60 minutes at 154F then I added 4 gallons at 207F to step up to 170F for 20 minutes. Beersmith says I should get around 8.5 IBUs from these mash hops. Then I did a vorlauf and drained into my kettle that had the first wort/whirlpool (i’m really not sure what to call that addition? first wortpool?) herbs. Then I sparged with 3.5 gallons of water at 170F to get a rinse of the remaining sugars. First running gravity 15° Brix (1.061), second running gravity was 9° Brix (1.036). Then a chilled, split between two fermentors and pitched yeast, one a combination of my two wild strains that contain brett and the other my first local yeast from the area. OG 13.2° brix (1.053).
Hops, cypress and lemon balm chilling in the first wortpool
My thought with the first wort/whirlpool additions is to get some more flavor and aroma from those hops and herbs. I’m not certain I’d really get much in the way of IBUs out of hops in this addition, but possibly? The reality of hops is that it’s not IBUs that give their preservative effects, if it was then stuffing casks of IPAs and other beers with dry hops for the voyage to India would have been pointless for the British. I also know a guy who added hops to a batch of pickles and they didn’t ferment, so IBUs don’t matter for preservation, just bittering, though other hop flavor compounds can give a perception of bitterness as well.
Update: I’ve added some misc notes and observations in a new post. Tasting notes to come soon.
Update: Tasting notes for the lemon balm and cypress beer